Project 11: Camshaft Replacement |
BMW E36 (1992-00) |
Valve Cover Gaskets |
These gaskets should be replaced every time that you adjust your valves. You should also put a little gasket sealer on the inside of the cover where the gasket mounts to the cover. This should prevent the oil leaks that sometimes occur when there isn't a really good seal. |
|
Valve Cover Gasket, Does Not Include Spark Plug Sealing Rings, 318i/is/iC (1992-98), 318ti (1995-99), Each Brand: Victor Reinz | |
| 11-12-1-721-876-M17 | $12.75 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (through 8/92) Brand: Meistersatz [Photo] | |
| 11-12-0-034-106-M61 | $18.50 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (through 8/92) Brand: Goetze | |
| 11-12-0-034-106-M42 | $21.00 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (9/92-95), M3 With 3.0L Engine (1995) Brand: Victor Reinz [Photo] | |
| 11-12-0-034-107-M17 | $22.75 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (9/92-95), M3 With 3.0L Engine (1995) Brand: Elring Klinger [Photo] | |
| 11-12-0-034-107-M30 | $22.50 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 323i/is/iC (1998-99), 328i/is/iC (1996-99), M3 With 3.2L Engine (1996-99) Brand: Victor Reinz [Photo] | |
| 11-12-0-034-108-M17 | $20.25 | |
Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 323i/is/iC (1998-99), 328i/is/iC (1996-99), M3 With 3.2L Engine (1996-99) Brand: Elring Klinger [Photo] | |
| 11-12-0-034-108-M30 | $20.50 | |
Spark Plug Hole Seals |
Spark Plug Hole Seal, 1 Per Car, With Extra Hole For Valve Cover Mounting Bolt, 318i/is/iC (1992-98), 318ti (1995-99), Each Brand: Meistersatz [Photo] | |
| 11-12-1-721-475-M61 | $2.25 | |
Spark Plug Hole Seal (3 per car, sold individually), 318i/is/iC (1992-98), 318ti (1995-99) Brand: Meistersatz [Photo] | |
| 11-12-1-721-476-M61 | $2.00 | |
Oil Galley Gasket |
Oil Galley Gasket, E36 318i/is/ti M44 Brand: Genuine BMW | 11-12-1-247-948-BOE | $4.00 | |
Valve Cover Mounts |
Rubber Mount for Valve Cover (2 per car, sold individually) 325i/is/iC (1992-95), M3 With 3.0L Engine (1995) Brand: Metzeler [Photo] | |
| 11-12-1-730-356-M36 | $3.25 | |
Valve Cover Bolt Seal |
Valve Cover Bolt Seal (sold individually), E36 318i/is/iC/ti, Each Brand: Victor Reinz [Photo] | |
| 11-12-1-721-879-M17 | $0.75 | |